If you want to repaint your vehicle on your own and achieve that trendy look, then it is important to get all the information you can get about the paint that you will use. You will need to choose the tools to use wisely, select that part of the garage that is well ventilated i.e. where there is free passage of air.
All automotive paints are not the same but there are some few qualities that you need to ascertain before you buy the paint for your car. Any paint that you use should not be polished after application unless it is of poor quality. Paint should always be flexible without the use of flex additives. To improve paint coverage, use paint primer as an undercoating.
When dealing with a minor repair or even a full restoration, preparation is absolutely necessary. Clean the surface that you are using. There are two types of contaminants that will need to be cleaned, these are Water based contaminants, such as dirt, dust and bird droppings. These can be removed easily with a good car washing soap and hot water. And then there are Solvent based contaminants that include wax, plastic resin, oil and tar grease. These require the use of grease remover. In order to know that the area is clean, flush it with water. The water should not stick on this surface, if it does you will need to add more grease remover.
Before applying the automotive paint that you desire, you can remove the old paint using solvent based color removers, making a smooth base on your car body. You are now ready to use a primer on these surface. Use a top quality spray gun, applying sweeping horizontal strokes back and forth. Let the coat dry before sanding it again and applying a fresh coat.Related Posts:
Modern day paint booth manufacturers have a significant number of types of such booths. The reason for this is to cover the entire spectrum of customer requirements. You could want a booth to paint an automobile or an aircraft or a very tiny intricate part in large numbers. All of these different samples would need different types of booths. Because of this reason the various types of paint booths are:
Automotive paint booth
Truck spray booth and
Industrial spray booths
Truck and Industrial Spray Booths
The truck spray booths are further categorized into the full; side and the semi-down draft varieties besides the reverse and front flow types. Similarly the industrial spray booths are sub-divided into the airplane booths and the production tunnels.
Automotive Spray booths
The automotive paint booth could be sub-divided into the premier variant, the insulated variant and the full, semi and side down draft variants besides the reverse and front flow types.
The Premier Spray Booth
This spray booth has white powder coated panels that are double walled and fully insulated. This results in considerable saving in energy, ease of maintenance and increased durability. The panels are punched with precision and made of heavy gauge galvanized steel for protection against corrosion and long life.
The paint booth has uniform airflow due to the full ceiling air intake filters. The surplus spray is forced out of the vehicle by the central flow exhaust system.
The direct-fired heat system scores by 20% in efficiency terms over the indirect fired heating system. Recirculation of preheated air from the baking cycle effects greater energy savings.
Electronic monitoring of filters, energy saving motor drives and an auto shut down system all help in the further saving in running costs.
The lights are strategically located and have access from the inside. This means that the exterior is flush and clean. The lighting is well focused in order to eliminate shadows. The lights have also been selected with the saving of energy costs in mind.
The provision of tri-fold doors and a 2-meter pit under the central exhaust system further enhance the utilization of the automotive paint booth.